Coolant 46 Special Lubricant for Screw Compressors, Part No. 3003100220

Coolant 46 screw compressor special lubricant

3003100220

20L plastic bucket

3003102020

209L metal drum

Optimize your compressor's performance. Unlike other mineral or synthetic oils used in oil-injected screw compressors, Coolant 46 is a long-life lubricant based on alcohols and esters with special additives, designed for a lifespan of 8,000 hours or even up to 10,000 hours. Its superior oxidation resistance, thermal conductivity, deposit prevention, high flash point, and low foaming properties significantly improve compressor reliability, reduce operating costs, extend equipment lifespan, and maximize production efficiency and investment returns. Coolant 46 is fully compatible with Ingersoll Rand oil-injected screw compressors and Ingersoll Rand's Super Coolant.

characteristic

Benefit

Advantages

Long lifespan

Reduce the frequency of equipment oil changes, lower equipment operating costs, and reduce waste oil emissions.

High equipment availability

Excellent antioxidant properties

Keep the system clean to prevent the buildup of deposits.

Extend the life of oil filters and oil separators, and reduce energy consumption.

Excellent thermal conductivity

Effectively prevents the generation of localized high temperatures in the system.

Improved equipment reliability and longer service life

Excellent performance in preventing sediment formation

Reduce wear on high-load moving parts

Extend the service life of moving parts

High flash point

Reduce the risk of fire

Safer

Low volatility

Smaller oil replenishment volume reduces equipment operating costs.

Reduce exhaust oil content

Excellent hydrolytic stability

Preventing rust in water pollution

Reduce rust formation and protect equipment in high humidity environments or during transportation, storage, and downtime.

Low foaming properties

To prevent foaming when air and oil are mixed, thus improving oil-gas separation efficiency.

Reduce fly oil and lower exhaust oil content

Excellent compatibility

System oil flushing is not required when adding or changing oil.

Fully compatible with Ingersoll Rand Super coolant

Product Description

name

Coolant 46

Oil type

100% Fully Synthetic Oil

Service life

8000 hours or 2 years

environment

Continuous high temperature environment 46℃, continuous high humidity environment

Use equipment

Ingersoll Rand oil-injected screw compressor

compatibility

Ingersoll Rand Super Coolant

capacity

20L/plastic bucket

Technical Description: Coolant 46 vs. Ingersoll Rand SSR Ultra Coolant. Coolant 46 is a lubricant specifically developed to replace Ingersoll Rand SSR Ultra Coolant, and is a patented product of Dow Chemical. It is a synthetic oil based on polyol esters and polyethylene glycol, designed and developed as an air compressor lubricant with special additives. Due to the expiration of the patent protection, we developed Coolant 46 after continuous analysis and testing of the various performance characteristics of SSR Ultra Coolant. The specific technical specifications of these two products are shown in the table below. They are synthetic oils based on polyol esters and polyethylene glycol, demonstrating their superior cooling and compressor lubrication capabilities.

performance

Test methods

Coolant 46

SSR Ultra Coolant

ISO rating

ASTM D2422

46

46

SAE viscosity grade

SAE J300

10W-20

10W-20

Kinematic viscosity (40℃)

ASTM D445

45.4

48

Kinematic viscosity (100℃)

ASTM D445

9.6

9.1

Viscosity Index

ASTM D2270

202

172

Pour point (℉)

ASTM D97

-51

-50

Flash point (℉)

ASTM D92

251

271

proportion

ASTM 1298

0.99

0.99

Foaming tendency

ASTM D189

zero

zero

There are no issues with the chemical mixing and addition of these two lubricants. When switching to Coolant 46, simply drain the SSR Ultra Coolant, replace the oil filter, and install Coolant 46. If the previous oil had a high total acid value or had been contaminated, a system oil flush should be performed first.