Coolant 32 Special Lubricant for Screw Compressors, Part No. 3003100320

Coolant 32 screw compressor special lubricating oil

3003100320

20L plastic bucket

3003102120

209L metal drum

Optimize your compressor's performance; unlike other mineral or synthetic oils used in oil-injected screw compressors, Coolant 32 is a long-life lubricant based on alcohols and esters with special additives, designed for a lifespan of 8,000 hours or even up to 10,000 hours. Its superior oxidation resistance, thermal conductivity, anti-deposit properties, high flash point, and low foaming properties perfectly improve compressor reliability, reduce equipment operating costs, extend equipment life, and maximize the return on investment in production and equipment. Coolant 32 is fully compatible with Sullair oil-injected screw compressors and is also fully compatible with Sullair's SULLUBE® 32.

Product Performance

Benefit

Advantages

Long lifespan

Reduce the frequency of equipment oil changes, lower equipment operating costs, and reduce waste oil emissions.

High equipment availability

Excellent antioxidant properties

Keep the system clean to prevent the buildup of deposits.

Extend the life of oil filters and oil separators, and reduce energy consumption.

Excellent thermal conductivity

Effectively prevents the generation of localized high temperatures in the system.

Improved equipment reliability and longer service life

Excellent performance in preventing sediment formation

Reduce wear on high-load moving parts

Extend the service life of moving parts

High flash point

Reduce the risk of fire

Safer

Low volatility

Smaller oil replenishment volume reduces equipment operating costs.

Reduce exhaust oil content

Excellent hydrolytic stability

Preventing rust in water pollution

Reduce rust formation and protect equipment in high humidity environments or during transportation, storage, and downtime.

Low foaming properties

To prevent foaming when air and oil are mixed, thus improving oil-gas separation efficiency.

Reduce fly oil and lower exhaust oil content

Excellent compatibility

System oil flushing is not required when adding or changing oil.

Fully compatible with Sullair SULLUBE® 32

Product Description

name

Coolant 32

Oil type

100% Fully Synthetic Oil

Service life

8000 hours or 2 years

environment

Continuous high temperature environment 46℃, continuous high humidity environment

Use equipment

Sullair oil-injected screw air compressor

compatibility

Sullair SULLUBE® 32 Lubricant

Sullube® 32 is a lubricant developed by Dow Chemical specifically for Sullube, and is a patented product of Dow Chemical. It is a synthetic oil based on polyol esters and polyethylene glycol, with special additives that achieve ideal results in compressor lubrication and cooling. Due to the expiration of this patent protection, we developed Coolant 32 after continuous analysis and testing of Sullube® 32. These two oils not only share the same base oil, but also achieve additive and miscible effects. Below is a comparison of some indicators of the two lubricants:

performance

Test methods

Coolant 32

Suullub 32

SAE viscosity grade

SAE J300

5W-20

5W-20

Kinematic viscosity (100℉)

ASTM 445

40

39.3

Kinematic viscosity (210℉)

ASTM 445

7.3

7.3

Viscosity Index

ASTM D2270

158

153

Pour point (℉)

ASTM D97

-55

-58

Flash point (℉)

ASTM D92

428

505

Ignition point temperature (℉)

ASTM W659

690

725

proportion

ASTM 1298

0.99

0.98

The above comparison of physical properties shows that the two oils are miscible without any issues. When switching from Sullube® 32 to Coolant 32, simply drain the old oil, replace the oil filter element, and then add the new Coolant 32. Alternatively, Coolant 32 can be added directly to the existing oil. Unless the original oil has an excessive total acid value or is contaminated, it is not necessary to perform an oil flush on the existing system before adding the new Coolant 32.